NAME
    Pod::Spell - a formatter for spellchecking Pod

VERSION
    version 1.27

SYNOPSIS
        use Pod::Spell;
        Pod::Spell->new->parse_from_file( 'File.pm' );

        Pod::Spell->new->parse_from_filehandle( $infile, $outfile );

    Also look at podspell

        % perl -MPod::Spell -e "Pod::Spell->new->parse_from_file(shift)" Thing.pm |spell |fmt

    ...or instead of piping to spell or "ispell", use ">temp.txt", and open
    temp.txt in your word processor for spell-checking.

DESCRIPTION
    Pod::Spell is a Pod formatter whose output is good for spellchecking.
    Pod::Spell is rather like Pod::Text, except that it doesn't put much
    effort into actual formatting, and it suppresses things that look like
    Perl symbols or Perl jargon (so that your spellchecking program won't
    complain about mystery words like "$thing" or ""Foo::Bar"" or
    "hashref").

    This class works by filtering out words that look like Perl or any form
    of computerese (like "$thing" or ""N>7"" or ""@{$foo}{'bar','baz'}"",
    anything in C<...> or F<...> codes, anything in verbatim paragraphs
    (code blocks), and anything in the stopword list. The default stopword
    list for a document starts out from the stopword list defined by
    Pod::Wordlist, and can be supplemented (on a per-document basis) by
    having "=for stopwords" / "=for :stopwords" region(s) in a document.

METHODS
  new
        Pod::Spell->new(%options)

    Creates a new Pod::Spell instance. Accepts several options:

    debug
        When set to a true value, will output debugging messages about how
        the Pod is being processed.

        Defaults to false.

    stopwords
        Can be specified to use an alternate wordlist instance.

        Defaults to a new Pod::Wordlist instance.

    no_wide_chars
        Will be passed to Pod::Wordlist when creating a new instance. Causes
        all words with characters outside the Latin-1 range to be stripped
        from the output.

  stopwords
        $self->stopwords->isa('Pod::WordList'); # true

  parse_from_filehandle($in_fh,$out_fh)
    This method takes an input filehandle (which is assumed to already be
    opened for reading) and reads the entire input stream looking for blocks
    (paragraphs) of POD documentation to be processed. If no first argument
    is given the default input filehandle "STDIN" is used.

    The $in_fh parameter may be any object that provides a getline() method
    to retrieve a single line of input text (hence, an appropriate wrapper
    object could be used to parse PODs from a single string or an array of
    strings).

  parse_from_file($filename,$outfile)
    This method takes a filename and does the following:

    * opens the input and output files for reading (creating the appropriate
      filehandles)

    * invokes the parse_from_filehandle() method passing it the
      corresponding input and output filehandles.

    * closes the input and output files.

    If the special input filename "", "-" or "<&STDIN" is given then the
    STDIN filehandle is used for input (and no open or close is performed).
    If no input filename is specified then "-" is implied. Filehandle
    references, or objects that support the regular IO operations (like
    "<$fh>" or "$fh-<Egt"getline>) are also accepted; the handles must
    already be opened.

    If a second argument is given then it should be the name of the desired
    output file. If the special output filename "-" or ">&STDOUT" is given
    then the STDOUT filehandle is used for output (and no open or close is
    performed). If the special output filename ">&STDERR" is given then the
    STDERR filehandle is used for output (and no open or close is
    performed). If no output filehandle is currently in use and no output
    filename is specified, then "-" is implied. Alternatively, filehandle
    references or objects that support the regular IO operations (like
    "print", e.g. IO::String) are also accepted; the object must already be
    opened.

ENCODINGS
    If your Pod is encoded in something other than Latin-1, it should
    declare an encoding using the ""=encoding *encodingname*"" in perlpod
    directive.

ADDING STOPWORDS
    You can add stopwords on a per-document basis with "=for stopwords" /
    "=for :stopwords" regions, like so:

        =for stopwords  plok Pringe zorch   snik !qux
        foo bar baz quux quuux

    This adds every word in that paragraph after "stopwords" to the stopword
    list, effective for the rest of the document. In such a list, words are
    whitespace-separated. (The amount of whitespace doesn't matter, as long
    as there's no blank lines in the middle of the paragraph.) Plural forms
    are added automatically using Lingua::EN::Inflect. Words beginning with
    "!" are *deleted* from the stopword list -- so "!qux" deletes "qux" from
    the stopword list, if it was in there in the first place. Note that if a
    stopword is all-lowercase, then it means that it's okay in *any* case;
    but if the word has any capital letters, then it means that it's okay
    *only* with *that* case. So a Wordlist entry of "perl" would permit
    "perl", "Perl", and (less interestingly) "PERL", "pERL", "PerL", et
    cetera. However, a Wordlist entry of "Perl" catches only "Perl", not
    "perl". So if you wanted to make sure you said only "Perl", never
    "perl", you could add this to the top of your document:

        =for stopwords !perl Perl

    Then all instances of the word "Perl" would be weeded out of the
    Pod::Spell-formatted version of your document, but any instances of the
    word "perl" would be left in (unless they were in a C<...> or F<...>
    style).

    You can have several "=for stopwords" regions in your document. You can
    even express them like so:

        =begin stopwords

        plok Pringe zorch

        snik !qux

        foo bar
        baz quux quuux

        =end stopwords

    If you want to use E<...> sequences in a "stopwords" region, you have to
    use ":stopwords", as here:

        =for :stopwords
        virtE<ugrave>

    ...meaning that you're adding a stopword of "virtù". If you left the ":"
    out, that would mean you were adding a stopword of "virtE<ugrave>" (with
    a literal E, a literal <, etc), which will have no effect, since any
    occurrences of virtE<ugrave> don't look like a normal human-language
    word anyway, and so would be screened out before the stopword list is
    consulted anyway.

CAVEATS
  finding stopwords defined with "=for"
    Pod::Spell makes a single pass over the POD. Stopwords must be added
    before they show up in the POD.

HINT
    If you feed output of Pod::Spell into your word processor and run a
    spell-check, make sure you're *not* also running a grammar-check --
    because Pod::Spell drops words that it thinks are Perl symbols, jargon,
    or stopwords, this means you'll have ungrammatical sentences, what with
    words being missing and all. And you don't need a grammar checker to
    tell you that.

SEE ALSO
    *   Pod::Wordlist

    *   Pod::Simple

    *   podchecker also known as Pod::Checker

    *   perlpod, perlpodspec

BUGS
    Please report any bugs or feature requests on the bugtracker website
    <https://rt.cpan.org/Public/Dist/Display.html?Name=Pod-Spell> or by
    email to bug-Pod-Spell@rt.cpan.org <mailto:bug-Pod-Spell@rt.cpan.org>.

    When submitting a bug or request, please include a test-file or a patch
    to an existing test-file that illustrates the bug or desired feature.

AUTHORS
    *   Sean M. Burke <sburke@cpan.org>

    *   Caleb Cushing <xenoterracide@gmail.com>

CONTRIBUTORS
    *   David Golden <dagolden@cpan.org>

    *   Graham Knop <haarg@haarg.org>

    *   Kent Fredric <kentfredric@gmail.com>

    *   Mohammad S Anwar <mohammad.anwar@yahoo.com>

    *   Olivier Mengué <dolmen@cpan.org>

    *   Paulo Custodio <pauloscustodio@gmail.com>

COPYRIGHT AND LICENSE
    This software is Copyright (c) 2024 by Olivier Mengué.

    This is free software, licensed under:

      The Artistic License 2.0 (GPL Compatible)